Home > Certification Program
PTI CERTIFICATION - Dedicated to Safety and Quality in Certification of Field Personnel, Plants Producing Unbonded Tendons, and Plants Producing PC Strand
Upcoming Event - Bonded Post-Tensioning Certification Workshop coming to Gainesville, FL May 2009
Click here to register for PTI Certification Workshops
One of PTI’s primary goals is to ensure that specifiers and purchasers of post-tensioning materials receive products and services that meet a recognized standard of quality. The PTI certification programs were developed in pursuit of this goal and are now recognized and required throughout North America. Programs include certification for plants producing unbonded post-tensioning materials and certification of field personnel including installers, inspectors, field engineers, and others.
Certification is required by the International Building Code (IBC) and American Concrete Institute (ACI) 318. The codes note that unbonded single-strand tendons shall be fabricated in a plant certified by an externally audited quality assurance program, which will ensure that the unbonded tendons and components comply with the requirements of this specification. Plants certified by PTI have been shown to meet the fabrication requirements of this specification. In addition, installation shall be performed by individuals certified by an independent training and certification program. Individuals certified by PTI have been shown to meet this requirement.
Plant Certification Programs
PTI offers two programs for certifying facilities producing materials used in post-tensioning systems.
Unbonded Tendon Fabrication Plants:
Launched in 1989, the first program, Unbonded Single Strand Tendon Fabrication Facilities, is for facilities that fabricate unbonded single strand tendons. Since its inception, participation in the program has grown steadily. Sixty-three plants are certified, which represents approximately 95 percent of the industry’s production. In 2007, PTI added provisions to permit certification of mobile fabricating facilities in addition to fixed plants. To view/download the latest list of certified Unbonded Tendon Fabrication Plants, click here.
PC Strand Manufacturing Plants:
The second program, PC Strand Plants, launched in 2007 and is for factories that manufacture Prestressed Concrete (PC) Strand. The program includes standardization of reporting practices and documentation, as well as establishes required testing procedures and specified minimum intervals. The certification of a factory under this program indicates that the factory and personnel are capable of producing PC strand in conformance with the program’s requirements. To date, six international plants in Asia and the Middle East have been certified and inspections of additional plants are underway. To view/download the latest list of certified PC Strand Manufacturing Plants, click here.
Several resources are available to those interested in pursuing PTI plant certification. Please click on one of the links below for more information.
Field Certification Programs - Safety, Quality, and Code Compliance
In addition to plant certification, PTI also offers certification of field personnel shown to comply with requirements in ACI 318. Proper training and education of personnel involved in post-tensioning field operations – Installers, Inspectors, Engineers, and others – are vital to ensuring the performance, serviceability and safety of post-tensioned concrete construction. PTI offers several field certification programs with more than 1,000 individuals certified in 2007.
Field Certification Programs are offered across the continent or delivered to your offices
PTI offers many resources to aid personnel in obtaining certification. Programs are offered at various locations each year. We also offer training delivered to a location of your choice at special rates. Contact Thomas Mathews at tfmathews@post-tensioning.org for details. Programs for certification of personnel include:
Training and Certification in Unbonded Post-Tensioning:
Level 1 – Fundamentals of Unbonded Post-Tensioning: This two-day class outlines the basic body of knowledge that should be possessed by all personnel involved in the installation, inspection, and evaluation of single strand unbonded post-tensioning systems. It also serves as an effective introduction for personnel new to post-tensioning, while at the same time providing support and organization for experienced persons. The course and study manual are also offered in Spanish. Click here for more Level 1 Certification Info and to register by fax or phone. Click here to register online.
Level 1- Field Fundamentals Certification Workshop Schedule
- February 7-8, 2009 - Las Vegas, NV
- March 7-8, 2009 - Atlanta, GA
- March 28-29, 2009 - Alexandria, VA
- April 18-19, 2009 - Denver, CO
- May 16-17, 2009 - Seattle, WA
- June 6-7, 2009 - Houston, TX
- July 25-26, 2009 - Orlando, FL
- August 8-9, 2009 - Dallas, TX
- August 22-23, 2009 - Ontario, CA
- September 12-13, 2009 - Charlotte, NC
- October 10-11, 2009 - Louisville, KY
- October 24-25, 2009 - Pensacola, FL
- November 7-8, 2009 - Phoenix, AZ
And by Special Request at a location of your choice - Contact PTI for more information
Level 2 – Inspectors: This advanced two-day class is intended to build on the Level 1 training and is intended to provide inspectors, building officials, engineers and industry personnel with the knowledge and capabilities for effective field inspection of single strand unbonded post-tensioning systems. Prerequisite: Completion of Field Fundamental Training and a minimum exam score of 70%. Click here for more Level 2 Certification Info and to register by fax or phone.
Level 2 - Inspector Certification Workshop Schedule
- November 8-9, 2008 - Dallas, TX
- November 15-16, 2008 - Orlando, FL
- June 27-28, 2009 - Denver, CO
- July 11-12, 2009 - Atlanta, GA
- September 26-27, 2009 - Dallas, TX
- December 5-6, 2009 - Orlando, FL
- And by Special Request at a location of your choice - Contact PTI for more information
Click here to register online
Level 2 – Superstructure Ironworker: This two-day course is designed for training and certification of installers working on elevated structures. Prerequisite: Completion of Field Fundamental Training and a minimum exam score of 70%.
Level 2 - Ironworker Certification Workshop Schedule
Training and Certification in Bonded Post-Tensioning: This intensive three-day training course covers the installation of various types of duct systems, diverse methods for installation of prestressing steel (including strand and bar), stressing equipment operation and procedures, as well as grouting techniques and operation of grouting equipment.
Levels 1 and 2 - Bonded Post-Tensioning Personnel Certification Workshop Schedule
- October 27-29, 2008 - The University of Texas - Austin, TX
- May 2009 - The University of Florida - Gainesville, FL
- And by Special Request at a location of your choice - Contact PTI for more information
Other Post-Tensioning Certification Workshops
Slab-on-Ground Installer/Stressor: This new program to be offered soon is intended specifically for post-tensioned slab-on-ground applications.
In addition to the scheduled workshops, PTI offers special request workshops for companies that wish to have a number of employees trained at their location. For more information on upcoming seminars, please visit our industry calendar.
Has your PTI Field Certification expired?
Field Certification must be kept current by successful completion of a renewal exam which emphasizes recent specification changes. PTI now has all Field Certification Programs available for renewal online. These programs include Level 1 Field Fundamentals, Level 2 Inspector, Level 2 Superstructure Ironworker and Bonded Certification.
|
|
|
|
